Filter
Top Products
English - 45
System Setup
■
If the P.SCAN button on the HDD & DVD
RECORDER’s front panel is pressed
during playback, the message “This
function is possible only on stop mode”
appears on the screen.
■
Progressive setting is only available when
the HDD & DVD RECORDER is in stop
mode.
NOTE
3
The message “Video Output Mode Progressive
Scan” will appear. The video will now be
Progressive Scan.
Video Output Mode
Progressive Scan
Setting up the
Progressive scan
1
With the unit in Stop mode, press the P.SCAN button
on the front of the HDD & DVD RECORDER.
The message “Press [Yes] to confirm Progressive
scan mode. Otherwise, press [No].” will appear.
Press the œ √ buttons to select Yes, and then
press the ENTER button.
2
The message “Please, set your TV to Progressive
input. To deactivate, press [STOP] key.” will
appear. Press the ENTER button.
If your TV supports Progressive Scan, press the
P.SCAN button on the front of the HDD & DVD
RECORDER. To view ‘Progressive scan mode’, first
connect the component cable.
(See page 22)
Be sure the Component cables are connected properly.
Press [Yes] to confirm Progressive scan mode.
Otherwise, press [No].
Yes No
Please, set your TV to Progressive input,
To deactivate, press [STOP] key.
OK
03-DVD-HR720_XAA_30~48 2005.9.6 5:30 PM Page 45