Filter
Top Products
46 - English
System Setup
Canceling the
Progressive scan
1
With the unit in Stop mode, press the P.SCAN button
on the front of the HDD & DVD RECORDER.
The message “Press [Yes] to confirm Interlace
scan mode. Otherwise, press [No].” will appear.
Press the œ √ buttons to select Yes, and then
press the ENTER button.
2
The message “Please, set your TV to Interlace
input. To deactivate, press [STOP] key.” will
appear. Press the ENTER button.
3
The message “Video Output Mode Interlace Scan”
will appear.
Video Output Mode
Interlace Scan
■
Do not press the P.SCAN button if you are
using a TV that does not support
Progressive mode as nothing will be
displayed on the screen.
■
If you press the P.SCAN button by mistake
when your TV does not support
Progressive mode, the mode will then
need to be released. To release the
Progressive mode, press the P.SCAN
button on the front panel 3 times. The
screen will recover after the PS indicator
on the front panel display turns off.
NOTE
Press [Yes] to confirm Interlace scan mode.
Otherwise, press [No].
Yes No
Please, set your TV to Interlace input,
To deactivate, press [STOP] key.
OK
03-DVD-HR720_XAA_30~48 2005.9.6 5:30 PM Page 46