Filter
Top Products
ENG-10
Setting the Menu Language
1 Open “MENU”
After pressing the MENU, press the OK or
❿
.
2 Select “Language”
Use the
or
❷
buttons to highlight Language,
then press the OK or
❿
.
3 Set menu Language
Place the selection arrow next to your desired
Language, then press the OK button.
4 On completion, press RETURN to exit the menu.
Français
Deutsch
Español
Italiano
Nederlands
Language Set
English
Presetting the Stations Automatically
☛
You do not need to preset the stations if you
have already set them automatically (see Plug &
Auto Set Up on page 8).
Your DVD-VCR contains a built-in tuner used to receive
television broadcasts.
You must preset the stations received through the tuner.
This can be done:
◆
Plug & Auto Set up (see page 8)
◆
Automatically
◆
Manually (see page 11)
You can store up to 80 stations.
1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding
,
❷
buttons to select
the Install option.
3 Press the OK or
❿
to select this option.
Result: The Install menu is displayed.
Auto Setup
Manual Setup
TV System : K
VCR Output CH : CH 36
Install
4 Press the corresponding
or
❷
buttons, until the
Auto Setup is selected.
And then press the OK or
❿
to select this option.
5 Press the
or
❷
buttons to select your country.
☛
The VCR searches for the stations
according to a preset preference list
corresponding to the country that you have
selected.