Filter
Top Products
ENG-15
4 Press the corresponding
or
❷
buttons, until the
NICAM option is selected.
5 To... Press OK or
❿
, until...
Mono mode Off is displayed.
Off: Only set at this position to
record the standard mono
sound during a NICAM
broadcast if the stereo
sound is distorted due to
inferior reception conditions.
NICAM mode On is displayed.
On: Normally set at this
position.
6 On completion, press RETURN three times to exit
the menu.
NICAM programmes are divided into 3 types. NICAM
Stereo, NICAM Mono and Bilingual (transmission in
another language).
NICAM programmes are always accompanied by a
standard mono sound broadcast and you can select the
desired sound. Please refer to page 22.
1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding
,
❷
buttons to select
the User Set option.
3 Press the OK or
❿
to select this option.
Result: The User Set menu is displayed.
NICAM
Colour System : Auto
NICAM : On
IPC : On
ShowView Extend : Off
User Set
On
Off
The Intelligent Picture Control Feature allows you to
adjust the sharpness of the image automatically,
according to your own preferences.
1 During playback, press the MENU button on the
remote control.
Result: The Setup menu is displayed.
2 Press the OK or
❿
.
Result: The Setup menu is displayed.
3 Press the corresponding
,
❷
buttons to select
the User Set option.
4 Press the OK or
❿
buttons to select this option.
Result: The User Set menu is displayed.
Intelligent Picture Control
Colour System : Auto
NICAM : On
IPC : On
ShowView Extend : Off
User Set
On
Off
5 Press the corresponding
or
❷
buttons, until the
IPC option is selected.
6 Press the OK or
❿
buttons to select the IPC
(intelligent picture control) option.
➢
When intelligent picture control mode is ON, the
sharpness of the image is adjusted
automatically.
7 To adjust the sharpness manually, press the
❷
button to turn the IPC mode OFF.
8 Press the
➛
or
❿
buttons until the picture is
displayed according to your preferences.
➢
If you do not press a button within ten seconds,
the PICTURE menu disappears automatically.
9 On completion, press RETURN three times to exit
the menu.