Filter
Top Products
ENG-22
Playing a Cassette
Cancelling a Preset Recording
You can cancel any programmes that are:
◆
Incorrect
◆
No longer required
1 Press TIMER on the remote control.
Result: The Timer Method is displayed.
2 Press the OK button to select Standard option.
Result: The TIMER PROGRAMMING menu is
displayed.
3 Select the programme to be cancelled by pressing
the
or
❷
buttons.
4 Press the CLEAR button to cancel the selected
programme.
Result: All the recording information is deleted and
the broadcast will not be recorded.
5 On completion, press RETURN twice.
Selecting the Audio Output Mode
You can select the mode in which the sound is
reproduced on the loudspeakers and AV outputs.
The following options are available.
Option Description
L Used to listen to the sound on the left Hi-Fi
channel.
R Used to listen to the sound on the right
Hi-Fi channel.
MIX Used to listen to the mixed sound of the
Hi-Fi and normal channels.
MONO Used to listen to the sound on the normal
mono channel.
L R Used to listen to Hi-Fi stereo sound on the
left and right channels.
➢
When playing back tapes recorded in
Hi-Fi, the sound switches to Hi-Fi after
five seconds of Mono.
To select the sound mode, simply press the AUDIO
button on the remote control until the required option is
displayed.
Adjusting Picture Alignment
Manually
The Picture Adjustment feature allows you to adjust the
alignment manually to obtain the best possible picture.
When noise bars or streaks appear during playback,
adjust alignment manually by pressing the TRK buttons
until the picture is clear and stable.
Result:
◆
The tracking bar appears.
◆
The image is adjusted.
◆
The tracking bar disappears when you
release the button.
This function allows you to play back any pre-recorded
cassette.
1 Switch on both the television and your DVD-VCR.
2 Insert the video cassette to be played. If the safety
tab on the cassette is intact, press
❿ll
.
Otherwise, the cassette is played automatically.
➢
When a cassette is loaded, the tape position is
optimized automatically to reduce disturbance
(Digital Auto Tracking).
When playing a cassette, if the end of the tape
is reached, the cassette is rewound
automatically.
NTSC tapes can be played back but cannot
be recorded with this DVD-VCR.
3 To... Then press...
Stop the playback
■
(STOP).
Eject the cassette (EJECT).
L R MIX
L R MONO