Filter
Top Products
ENG-14
4 Press the corresponding
or
❷
buttons, until the
Colour System option is selected.
5 Press the OK or
❿
button to select
Auto
➝
PAL
➝
MESECAM
➝
B/W.
Auto When playing back a cassette, the system
standard is automatically selected by the
DVD-VCR.
B/W Black and White
6 On completion, press RETURN three time to exit
the menu.
Your DVD-VCR output channel may need to be
changed if the pictures suffer from interference or if
your TV cannot find the pictures.
Also, you can change the DVD-VCR output channel to
adjust the frequency in which information is displayed
on the screen.
1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding
,
❷
buttons to select
the Install option.
3 Press the OK or
❿
to select this option.
Result: The Install menu is displayed.
4 Press the
or
❷
buttons, until the VCR Output
CH option is selected.
5 Select the required output channel (CH21~CH69)
by pressing the OK or
❿
buttons
➝
CH21
➝
.. CH36
➝
.. CH69
6 On completion, press RETURN to exit the menu.
Then tune your television again (see page 9).
Before recording or playing back a cassette, you can
select the required system standard.
Otherwise, the system automatically selects the
reception standard when you select AUTO.
➢
◆
When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
◆
When you playback an NTSC-recorded tape on
this DVD-VCR make a setting on the colour
system according to your TV. If your TV is a
PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43
compatible), set NT4.43 and you can record
NT4.43.
1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding
,
❷
buttons to select
the User Set option.
3 Press the OK or
❿
to select this option.
Result: The User Set menu is displayed.
Setting the DVD-VCR Output
Channel
Selecting the Colour Mode
Auto Setup
Manual Setup
TV System : K
VCR Output CH : CH 36
Install
CH:21
:
CH:36
:
CH:69
Colour System : Auto
NICAM : On
IPC : On
ShowView Extend : Off
User Set
Auto
PAL
MESECAM
B/W