Filter
Top Products
ENG-30
Setting Up the Audio Options
1 With the unit in Stop mode, press the MENU button.
2 Select DVD using
,
❷
buttons, then OK or
❿
button.
3 Select Audio Setup using
,
❷
buttons, then press
the OK or
❿
button.
4 Use the
,
❷
buttons to select the desired item.
Then press the OK or
❿
button.
Dolby Digital Out
1. PCM : Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream
(5.1CH). Select Bitstream when using
the Digital Audio Output.
➢
Be sure to select the correct Digital Output or no
audio will be heard.
DTS
Dolby Digital Out
MPEG-2 Digital Out
PCM Down Sampling
Setup
Setup
Setup :
Display Setup
MPEG-2 Digital Out
1. PCM : Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream : Converts to MPEG-2 Digital Bitstream
(5.1CH or 7.1CH).Select Bitstream
when using the Digital Audio Output.
DTS
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital
output only. Select DTS when
connecting to a DTS Decoder.
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
PCM Down Sampling
1. On : Select this when the amplifier
connected to the player is not 96KHz
compatible.
In this case, the 96KHz signals will be
down converted to 48KHZ.
2. Off : Select this when the amplifier
connected to the player is 96KHz
compatible.
In this case, all signals will be output
without any changes.
➢
• How to make the SETUP menu disappear or
return to menu screen during set up; Press
RETURN or
➛
button.
• Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.