Filter
Top Products
OPERATION PANEL FUNCTIONS AND RESTRICTIONS3
10 English
NETWORK
SETTINGS
NETWORK
CONTROL
NETWORK
OPERATION
DVR VIEWER
4. Control speed
Adjusts the operation speed for Pan and Tilt.
5. [ZOOM]
Activates zoom mode. (“ZOOM” turns green)
Use -/+ to zoom.
6. [FOCUS]
Activates focus adjust mode. (“FOCUS” turns green)
Adjust focus with -/+.
7. [IRIS]
Activates IRIS adjust mode. (“IRIS” turns green)
Adjust IRIS with -/+.
8. -/+
Use when zooming, adjusting focus, and adjusting IRIS.
9. [AF]
Use auto-focus.
10. [SEQ]
Starts automatic camera selection. Perform another
function to stop.
11. [PAN]
Starts automatic panning. Perform another function to
stop.
12. [TOUR]
Starts TOUR. Perform another function to stops.
13. Preset access
Move camera into position set with preset number.
For preset numbers after 9, select from the drop-down list
and click [GO].
14. Preset register
Select a preset number from the drop-down list and click
Menu set to register the current camera position.
15. Record (ID3)
This button starts normal recording.
16. Record stop (ID3)
This button stops normal recording.
17. Timer (ID3)
This button activates timer standby mode when clicked
while recording is stopped. If clicked in Timer Standby
mode, it deactivates this mode.
18. Disconnect (ID1/2/3)
This button disconnects the PC from the network and
switches control rights to the unit.
3 Click [CAMERA CONTROL].
Camera operation panel changes to Normal operation
panel.
Finishing dome camera operation
e00_l8hbe_xe_nw_7.book Page 10 Friday, November 5, 2004 11:01 AM