Filter
Top Products
MENU-SPECIFIC SETTINGS2
32 English
NETWORK
SETTINGS
NETWORK
CONTROL
ETWORK
OPERATION
DVR VIEWER
4 Select “REC PROGRAM GROUP” from
the pull-down menu on the screen.
Select OFF, P-1, P-2, P-3, or P-4.
z Settings for program groups should be made separately
as described in “7. PROGRAM REC SET”. (JP. 32)
5 Click [SAVE].
The new setting is saved.
When monitoring a number of cameras connected to this
digital video recorder, a separate recording rate can be set
for each camera. In addition, video recorded from each
camera and the corresponding recording rates can be set
in programs with up to four patterns, thus facilitating the
simple specification of programs for timer-setting and
normal recording setting menus.
Set up to 9 channels for the DSR-3709P.
Set the picture quality for recording to the normal recording
area as follows.
1 Select “PROGRAM” from the pull-down
menu on the screen.
Select from P-1, P-2, P-3 or P-4.
2 Select “SELECT INDIVIDUAL CAMERA
RATE (FPS)” from the pull-down menu
on the screen.
Of the displayed cameras, select those from which video is
to be recorded, and then set a recording rate for each.
[Settings] ( indicates default setting)
z Usable recording rates
25, 12.5, 6.25, 3.125, 1.563, 1, 0.5, 0.33, 0.25, 0.2,
0.1, 0.05, 0.03
(Unit: FPS)
3 Click [SAVE].
When setting has been completed, the associated normal
recording time quantity is displayed for reference
purposes.
4 Use the above procedure to set up to
four program patterns.
z Set values are lost if switched to a different window
without clicking [SAVE].
7. PROGRAM REC SET
PROGRAM REC SET
SELECT INDIVIDUAL CAMERA RATE (FPS)
NORMAL REC : 88H
SAVE
1 :
0.5 0.5
2 : 3 :
0.5 0.5
4 :
0.5 0.5
5 : 6 :
0.5 0.5
7 : 8 :
9 :
0.5 0.5
10 : 11 :
0.5 0.5
12 :
0.5 0.5
13 : 14 :
0.5 0.5
15 : 16 :
PROGRAM :
P-1
1
2
3
Setting Description
OFF
Video will not be recorded from the selected
camera.
REC RATE Sets the rate for recording.
e00_l8hbe_xe_nw_7.book Page 32 Friday, November 5, 2004 11:01 AM