Filter
Top Products
PREPARING FOR NETWORK CONTROL2
6 English
NETWORK
SETTINGS
NETWORK
CONTROL
NETWORK
OPERATION
DVR VIEWER
4 Entering the operation screen
(1) The following screen will be displayed when password
verification has been completed successfully.
(2) Select the language and click [OK]. The operation
screen will be displayed and computer control will now
be possible.
z Connection will not be possible when a menu screen is
being displayed on the DVR unit, playback-related
operations are being carried out, or camera control is
being performed. In such cases, cancel the menu
screen selection or stop the playback operation or
camera control operation before attempting to remake
connection.
z Connection may not be possible via a proxy server. In
such a case, cancel the proxy settings.
Whenever the button on the PC’s operation screen is
clicked, access will be cancelled and control rights will
switch back to the unit.
z To forcibly cancel PC access from the unit, press and
hold the [EXIT/OSD] button for at least 2 seconds.
z Access from the PC will not be permitted for a period of
10 seconds after access has been canceled.
z The access connection will also be cancelled whenever
communication with the PC is not possible for a period
of about 1 minute or more, and control rights will switch
back to the unit in such a case.
z If the browser is closed without clicking the button,
approximately 1 minute is required before reconnection
is possible.
Messages related to the switching of control or the network
connection condition may be displayed on-screen at any
time.
1 When control rights are switched to the
PC
“NETWORK CONTROL” appears on the monitor.
The “NETWORK CONTROL” message will be displayed
when connected to a network, regardless of whether
control is being carried out from the PC or the digital video
recorder.
z The “NETWORK CONTROL” message is not displayed
when “NETWORK STATUS” has been set to “OFF”
using the unit’s menu. (Regardless of network
operations, the unit will continue to display images.)
Controlling from the unit
Messages displayed when connected
Display on the unit
02
01-01-04 00:00:00 REC REPEAT EN A ALARM 0000
NETWORK CONTROL
NETWORK CONTROL
NETWORK CONTROL
e00_l8hbe_xe_nw_7.book Page 6 Friday, November 5, 2004 11:01 AM