Sharp SD-AT50 DVD Player User Manual


 
E-11
SD-AT50(U)E2.fm02/7/19
SD-AT50
ENGLISH
DX-AT50
Preparation for Use
- System connections -
System connections
" Connecting the units
Connect the DVD player, AV control unit and subwoofer/amplifier unit as follows.
Caution:
! Make sure to connect the system after unplugging the DVD player and the
subwoofer/amplifier unit.
! Put the 2 system connection cables (for sound and signal/power) together. If not,
noises may be heard.
To unplug the system connection cable:
AM loop antenna
DVD Player
AV Control Unit
Subwoofer/Amplifier Unit
System
connection cable
(For DVD
player)
System
connection cable
(For sound, black)
Set the arrow
upward.
Set them close
to one another.
Set them close
to one another.
Set the arrow
to the left.
System
connection cable
(For signal/power,
Blue)
FM antenna
Digital audio cable
Connect either an audio digital cable or commercially available RCA cord. Press
the DIGITAL/ANALOG button to switch between digital and analog signals accord-
ing to the connection.
AV control unit
Connecting units
Cord
AV control unit
AV control unit
AV control unit
AV control unit
DVD player
System connection cable
(For sound, Black)
System connection cable
(For signal/power, Blue)
Digital audio cable
(For digital signal)
Commercially available
RCA cord
(For analog signal)
System connection cable
(For DVD player)
DVD player
DVD player
Subwoofer/
Amplifier unit
Subwoofer/
Amplifier unit
1
2
Push
Unplug