Sharp SD-AT50 DVD Player User Manual


 
E-19
SD-AT50(U)E2.fm02/7/19
SD-AT50
ENGLISH
DX-AT50
Preparation for Use
- Changing the initial setting of DVD -
Changing the initial setting of DVD
Turn on the TV, and switch the input to the "VIDEO 1" or "VIDEO 2" etc. accord-
ingly.
A new setting will be retained even if the DVD player is set to the stand-by mode. If
you want to restore or change the setting, reset it.
[Back]
Notes:
! You cannot display the setup screen while a disc is playing.
! See page 21 for selecting another language for disc menus.
! The previous screen appears by pressing the RETURN button while selecting
an item or setting.
1
Press the ON/STAND-BY button to turn the power on.
! The startup screen appears.
! If the startup screen does not appear, set the input to "DVD".
! The disc should be stopped at this time.
2 After pressing the button, press the SETUP DVD button.
3
Press the or button to select the menu and press the ENT but-
ton.
4 Press the or button to change the setting and press the ENT
button.
Example: "PLAYER MENU" is selected
Repeat the operation as instructed.
(The number of repetition depends on the setting item.)
To change other settings, begin from step 3.
5 Press the SETUP DVD button.
The new setting is memorized.
SELECT: SET:
EXIT:
RETURN
SETUP
ENTER
CANCEL:
SET UP
1.LANGUAGE
2.DISPLAY
3.AUDIO
4.PARENTAL
1.ENGLISH
SET-UP
LANGUAGE CONTROLS
PLAYER MENU
2.FRANÇAIS
3.ESPAÑOL
SELECT: SET:
EXIT:
RETURN
ENTER
CANCEL:
SETUP