Filter
Top Products
E-25
SD-AT50(U)E3.fm02/7/19
SD-AT50
ENGLISH
DX-AT50
Basic Operation
- Listening to the radio -
Listening to the radio
[Front]
To receive an FM stereo transmission:
Press the BAND button to display the "STEREO" indicator.
! "ST" will appear when an FM broadcast is in stereo.
! If the FM reception is weak, press the BAND button to extinguish the "STEREO"
indicator. The reception changes to monaural, and the sound becomes clearer.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the FUNCTION button to display FM or AM, and then the
BAND button repeatedly to select the desired frequency band (FM
STEREO, FM or AM).
3 Press the or button to tune in to the desired station.
Manual tuning:
Press the or button as many times as required to tune in to the desired
station.
Auto tuning:
When the or button is pressed for more than 0.5 seconds, scanning will
start automatically and the tuner will stop at the first receivable broadcast station.
Notes:
! When radio interference occurs, auto scan tuning may stop automatically at
that point.
! Auto scan tuning will skip weak signal stations.
! To stop the auto tuning, press the or button again.
FM stereo receiving indicator
FM stereo mode indicator