Filter
Top Products
E-13
SD-AT50(U)E2.fm02/7/19
SD-AT50
ENGLISH
DX-AT50
Preparation for Use
- Antenna connection / TV connection -
Antenna connection
Notes:
! Placing the antenna on the system or near the AC power cord may cause noise
pickup. Place the antenna away from the system for better reception.
! When static is still heard even after adjusting the position of the AM loop antenna,
try reversing the wire connections.
Installing the AM loop antenna:
Outdoor FM or AM antenna:
Use an outdoor FM or AM antenna if you require better reception. Consult your
dealer.
Note:
When using an outdoor AM antenna, be sure to keep the wire of the AM loop
antenna connected.
TV connection
Caution:
Before connecting the TV, turn off all the equipment.
"
Connecting to TV with video cable
Notes:
! Change the TV input in accordance with the connected jack.
! Do not connect other equipment between the TV and the DVD player. If they are
connected via a VCR, pictures may be distorted.
Supplied FM antenna:
Connect the FM antenna wire to the FM 75
OHMS jack and position the FM antenna wire in
the direction where the strongest signal can be
received.
Supplied AM loop antenna:
Connect the AM loop antenna wire to the AM
and GND terminals. Position the AM loop anten-
na for optimum reception. Place the AM loop an-
tenna on a shelf, etc., or attach it to a stand or a
wall with screws (not supplied).
< Assembling > < Attaching to the wall >
Wall Screws (not supplied)
White
Black
Outdoor
FM antenna
Outdoor AM antenna
49 feet (15 m)
25 feet (7.5 m )
Earth rod
AM loop antenna
TV
Video cable
(supplied)
To video output jack
To video input
jack