Sharp DV-SR3U DVD Player User Manual


 
74
Playing 2 Channel Audio with a
Digital Connection
Enjoying High Quality Sounds
Digital Connection to an MD Recorder or
Other Audio Equipment without a Dolby
Digital Decoder
Audio CD or Video CD
You can enjoy these discs by playing them back by the
ordinary playback procedure. (The normal audio output
is not played back for discs recorded with DTS.)
DVD Video Disc
There is no audio signal generated for DVD video discs
recorded with DTS. A processor or amplifier equipped
with a DTS Surround decoder function is required to enjoy
DTS audio.
COMPONENT OUT
IN
FROM
ANTENNA
480i/
480p
OPTICAL
COAXIAL
DIGITAL AUDIO OUTVHF/UHF/CATVLINELINE S-VIDEOVIDEOR-AUDIO-LS-VIDEOVIDEOR-AUDIO-L
PASS THROUGH
OUT 1
OUT 2
IN 1
AUTO
REC
IN 2
Audio equipment with an
optical or coaxial digital
input terminal
Optical digital cable
(commercially available)
Coaxial digital cable
(commercially available)
or
To DIGITAL
AUDIO Output
OPTICAL terminal
To optical digital
input terminal
To coaxial digital
input jack
To DIGITAL
AUDIO Output
COAXIAL jack
The Recorder
Important!
When using this connection, set “DIGITAL AUDIO
OUTPUT” to “PCM” (see page 80).
Digital Connection to an MD Recorder to Record a CD
When you are using a digital connection to record
the contents of a CD to an MD, the track numbers of
the CD may not match the track numbers recorded
to the MD.