Sharp DV-SR3U DVD Player User Manual


 
75
Recording from a Camcorder
(VCR) Using an Analog
Connection
VR MODE
DVD-RW
VIDEO MODE
DVD-RW
DVD-R
Material from a camcorder can be recorded with this
Recorder using an analog connection. You can capture
video by connecting a camcorder or VCR to the LINE IN 1,
2 or 3 jacks of this Recorder.
NOTE
More vivid images can be viewed by connecting the S-
VIDEO IN jack on this Recorder with the S-video Out jack
on the camcorder using an S-video cable.
Some camcorders may be required to be connected
using a special cable.
Refer to the operation manual provided with the
camcorder for further information on the procedure for
connecting the camcorder.
Material protected with a copy guard cannot be re-
corded. It may be impossible to get the correct video,
even if you just view without recording.
Date and time as well as the contents of cassette memory
cannot be recorded with this Recorder.
If you input video from an external device to this Re-
corder, there will be a slight difference in image quality
between the video viewed from the external device
directly on the TV, and video viewed as external input to
the Recorder.
Example:
To record by connecting a camcorder to the LINE IN 3
jacks.
RESET
S-VIDEOVIDEOL (MONO)-AUDIO-R
LINE IN 3
To VIDEO/AUDIO
Input jacks
To S-video
output jack
To video/audio
output jack
To S-VIDEO
Input jack
Camcorder
The Recorder
Video/audio cable
(commercially available)
S-video cable
(provided with
camcorder or
commercially
available)
1
Select audio to be input from the external
equipment.
Select audio using “EXTERNAL AUDIO” (page 76).
Select “L CH” or “R CH” with “DUAL MONO REC.
SET” (page 76) to record in Video mode.
2
Press INPUT to set the connection to exter-
nal input channel (example: L3).
The setting will cycle as follows each time you press
the button.
3
Play back the camcorder or VCR.
4
Press REC when you reach the scene you
want to start recording.
The Recorder starts recording.
5
Press STILL/PAUSE when you want to
pause recording.
Press STILL/PAUSE again to cancel Pause
mode.
6
Press STOP when you want to stop (end)
recording.
L1 (IN 1)
TV channels
L3 (IN 3)
L2 (IN 2)
Recording from External Equipment