Filter
Top Products
22
Playing back a tape
You can monitor the playback picture in the viewfinder. You can also monitor the
picture on a TV screen, after connecting the digital camcorder to a TV or VCR.
(1) Set the POWER switch to ON
(2) Set CAMERA/VTR to VTR.
(3) Insert the recorded tape with the window facing out.
(4) Open the cover, then press · to start playback.
CAMERA
VTR
STOP REW PLAY FF PAUSE
REC
1
2
3
4
POWER
OFF ON
To stop playback, press π.
To rewind the tape, press 0.
To fast-forward the tape rapidly, press ).
To mark the portion you want to monitor again
Press ZERO SET MEMORY while playing back. After you finish playing back, press
0. The tape rewinds to the position you want (0:00:00) and stops.
To monitor the sound while viewing the playback picture in the
viewfinder
Connect headphones (not supplied) to the 2 jack or turn on the built-in speaker by
setting SPEAKER to ON.
Using the Remote Commander
You can control playback using the supplied Remote Commander. Before using the
Remote Commander, insert the R6 (size AA) batteries.
Note on the DISPLAY button on the remote commander
Press DISPLAY to display the screen indicators. To erase the indicators, press DISPLAY
again.