Filter
Top Products
72
Tips for using the battery pack
The switch on the battery pack
This switch is provided so that you can mark the charged battery pack. Set the switch
to the “green mark” position when charging is completed. (When removed from the
charging adaptor, the switch exposes the green mark. When removed from your digital
camcorder, no mark is indicated.)
The life of the battery pack
If the battery indicator flashes rapidly just after turning on the digital camcorder with a
fully charged battery pack, the battery pack should be replaced with a new fully
charged one.
Charging temperature
You should charge batteries at temperatures from 10°C to 30°C (from 50°F to 86°F).
Lower temperatures require a longer charging time.
Notes on charging
A brand-new battery pack
A brand-new battery pack is not charged. Before using the battery pack, charge it
completely.
Recharge the battery pack whenever you like
You do not have to discharge it before recharging. If you charged the battery pack fully
but you did not use it for a long time, it becomes discharged. Then recharge the battery
pack before use.
Notes on the terminals
If the terminals (metal parts on the back) are not clean, the battery charge
duration will be shortened.
When the terminals are not clean or when the battery pack has not been used for a long
time, repeatedly install and remove the battery pack a few times. This improves the
contact condition. Also, wipe the + and – terminals with a soft dry cloth or paper.
Be sure to observe the following
• Keep the battery pack away from fire.
• Keep the battery pack dry.
• Do not open nor try to disassemble the battery pack.
• Do not expose the battery pack to any mechanical shock.