Filter
Top Products
46
Adjusting the gain
To adjust the G (gain) PRESET menu item
When you want to choose a gain setting higher than 9, select the appropriate level from
the G PRESET menu.
The setting data is set into memory. When you dial another setting, (e.g. 9), then return
to PRESET, the previous setting is selected automatically.
(1) Open the cover, then press MENU to display the menu.
(2) Press or to select G PRESET, then press EXECUTE.
(3) Press or to select a setting, then press EXECUTE.
You can select the following settings: –3, 0, 3, 6, 9, 12, 15, 18 dB.
(4) Press MENU to erase the menu display.
2
3
1
MENU
MENU
D ZOOM OFF
16 : 9 WIDE
ZEBRA
COMMANDER
BEEP
FRAME REC
INT REC
[ MENU ] : END
MENU
6dB
9dB
12dB
15dB
G PRESET 18dB
[ MENU ] : END
MENU
BEEP
FRAME REC
INT REC
SLOW SHTR
S PRESET
G PRESET 15dB
CUSTOM
[ MENU ] : END
Note on the gain
If you set gain too high, picture noise results.