Filter
Top Products
Location and Function of Parts
Chapter 1 Overview
18 Chapter 1 Overview
CH-1
AUDIO IN
600Ω
OFF ON
0dBm
-8dBm +4dBm
CH-2
600Ω
0dBm
-8dBm +4dBm
CH-3
600Ω
0dBm
-8dBm +4dBm
CH-4
600Ω
0dBm
-8dBm +4dBm
AUDIO OUT
CH-1 CH-2 CH-3 CH-4
OFF ON OFF ON OFF ON
Y
R-Y
B-Y
ANALOG I/O
REF.VIDEO
IN
75Ω
ON
OFF
OUT
IN
OUT
TIME CODE
VIDEO IN
75Ω
ON
OFF
VIDEO OUT
1
2
(SUPER)
OUTIN
MONITOR
AUDIO
OUTIN
S VIDEO
COMPONENT VIDEO
4 Analog audio signal input/output section
1 AUDIO IN 600 Ω ON/OFF switches
Use these switches to select either 600 Ω impedance
(the ON setting) or 10-kΩ impedance (the OFF setting)
for the AUDIO IN CH-1 to CH-4 connectors.
2 AUDIO IN –6 dBm/0 dBm/+4 dBm switches
Set these switches according to the levels of the signals
input to the AUDIO IN CH-1 to CH-4 connectors.
3 AUDIO IN CH-1 (channel 1) to CH-4 connectors
(XLR 3-pin, female)
Use these connectors to connect separate channels of
audio input from a player VCR or other external audio
equipment.
4 AUDIO OUT CH-1 (channel 1) to CH-4
connectors (XLR 3-pin, male)
Output channel-1 to channel-4 audio signals,
respectively.
5 MONITOR AUDIO connector (RCA phono
jack)
Outputs audio signals for monitoring. The audio
signals to be output from this connector can be
selected with the MONITOR SELECT switches on the
front panel. (See 4 menu control panel on page 13.)
5 MONITOR AUDIO connector
4 AUDIO OUT CH-1 to CH-4 connectors
3 AUDIO IN CH-1 to CH-4 connectors
2 AUDIO IN –6 dBm/0 dBm/+4 dBm
switches
1 AUDIO IN 600 Ω ON/OFF switches