Filter
Top Products
Chapter 5 Connections and Settings 63
Chapter 5 Connections and Settings
Connection of a video monitor
Set up the following connections to enable monitoring
of video and audio signals on a video monitor. In
addition to video signals, you can have time data, the
DSR-85/85P’s operation mode, alarm messages, and
other information displayed as text on the monitor
screen by setting “CHARA. DISPLAY” under the
DISPLAY CONTROL menu item to “ON” (this is the
factory default setting).
For details of menu operations, see Chapter 4.
75 Ω termination switch: ON (or attach a
75 Ω terminator)
Input switches: Set according to the type
of input signals.
Video monitor
Audio input
Composite video input
1 Cable with RCA phono
plugs (not supplied)
2 75 Ω coaxial cable
(not supplied)
VIDEO
OUT
2(SUPER)
MONITOR
AUDIO
12
DSR-85/85P
Settings on an editing control unit
When connecting an editing control unit, make the
settings as follows, according to the model.
PVE-500
No settings are required.
BVE-600/900/910/2000 (NTSC model) or FXE-
100/120
Set the VCR constants as follows.
123456789101112131415
80 10 00 96 05 05 03 80 0A 08 FE 00 80 5A FF
BVE-600/900/910/2000 (PAL model) or FXE-
100P/120P
Set the VCR constants as follows.
123456789101112131415
81 10 00 7D 05 05 02 80 0A 07 FE 00 80 4C FF
RM-450/450CE
Set the DIP switches as follows.
• Left switches
76543210
OFF––OFF––––
• Right switches (RM-450)
76543210
OFF – OFF ON OFF OFF ON ON
• Right switches (RM-450CE)
76543210
ON – OFF ON OFF OFF ON ON
BVE-800
Set the DIP switches as follows.
• SW2
12345678
ON OFF ON ON – ON ON –
• SW3 (NTSC model)
12345678
OFF ON OFF ON – ON OFF OFF
• SW3 (PAL model)
12345678
ON ON OFF ON – ON OFF OFF