Filter
Top Products
Playback
Chapter 2 Recording and Playback
30 Chapter 2 Recording and Playback
For this purpose:
Do this:
Stop playback Press the STOP button.
The unit enters stop mode, and will automatically
switch to standby off mode after 8 minutes.
Adjust the audio playback
level
Use the audio level control on the monitor.
Search while viewing Press and hold either F FWD or REW button to
search at 32 times normal speed in forward or
reverse direction. To return to normal playback
mode, press the PLAY button.
Note
The search picture will not be displayed unless “F.
FWD/REW” under the AUTO EE SELECT menu
item is set to “PB”.
Inhibit the unit from
outputting text information
(time data, operation mode
indications, etc.) to the
video monitor.
Change the menu settings.
See “CHARA. DISPLAY” (page 43) in Chapter 4
“Menu Settings”.
Change the time period
before the unit switches to
standby off mode from stop
mode
Change the menu settings.
See “TAPE PROTECTION” (page 46) in Chapter 4
“Menu Settings”.
Remove the cassette Press the EJECT button.
After a few seconds, the tape is unwound from the
head drum and the cassette is automatically ejected.
If a CNT value is shown on the time counter display
(assuming the time data type indicator “COUNTER”
is lit), the CNT value is reset.
Disable the automatic
rewind function
Change the menu settings.
See “AUTO REW” (page 42) in Chapter 4 “Menu
Settings”.