Filter
Top Products
User Guide
PrintSearch
Operation Search
Before use
Getting started
Recording
Playback
Playing images on a TV
Saving images with a
computer
Using the Wi-Fi function
Customizing your
camcorder
Troubleshooting
Maintenance and
precautions
Contents list
Top page > Troubleshooting > Troubleshooting > Overall operations
Overall operations
The power does not turn on.
Attach a charged battery pack to the camcorder. [Details]
Connect the AC Adaptor (sold separately) to a wall outlet (wall socket). [Details]
The camcorder does not operate even when the power is
set to on.
It takes a few seconds for your camcorder to be ready to record after the power
is turned on. This is not a malfunction.
Disconnect the power supply (battery pack or AC Adaptor) from the camcorder,
then supply the power again after about 1 minute.
The menu settings have been changed automatically.
While Intelligent Auto is active, some menu settings related to image quality will
be changed automatically.
The following menu item returns to the default setting when you switch between
movie shooting, sound recording and playback modes.
[
Fader]
The camcorder gets warm.
Your camcorder may become warm during operation. This is not a malfunction.
Intelligent Auto is canceled.
The Intelligent Auto setting is canceled if you change the following settings:
[White Balance]
[Exposure]
[Low Lux]
[Scene Selection]
[Auto Back Light]
[Face Detection]
Back to top
Copyright 2013 Sony Corporation
133