Filter
Top Products
User Guide
PrintSearch
Operation Search
Before use
Getting started
Recording
Playback
Playing images on a TV
Saving images with a
computer
Using the Wi-Fi function
Customizing your
camcorder
Troubleshooting
Maintenance and
precautions
Contents list
Top page > Maintenance and precautions > Maintenance and precautions > About
the battery pack
About the battery pack
To charge the battery pack
Be sure to charge the battery pack before you start using your camcorder.
We recommend that you charge the battery pack in an ambient temperature
range of 10 ˚C to 30 ˚C (50 °F to 86 °F) until the CHG (charge) lamp turns off. If
you charge the battery pack outside of this temperature range, you may not be
able to charge it efficiently.
The CHG (charge) lamp flashes during charging under the following conditions.
The battery pack is not attached correctly.
The battery pack is damaged.
The temperature of the battery pack is low.
Remove the battery pack from your camcorder and put it in a warm place.
The temperature of the battery pack is high.
Remove the battery pack from your camcorder and put it in a cool place.
To use the battery pack effectively
Battery pack performance decreases when the ambient temperature is 10 ˚C (50
°F) or below, and the length of time you can use the battery pack becomes
shorter. If that happens, one of the following is recommended to enable longer
use of the battery pack:
Put the battery pack in a pocket to warm it up, and install it on your camcorder
immediately before you start recording.
Frequent use of the LCD screen or a frequent playback, fast forward or reverse
operation wears out the battery pack faster.
Be sure to turn off the camcorder when not recording or playing back on your
camcorder. The battery pack is also consumed when your camcorder is in
recording standby or playback pause.
Have spare battery packs ready for 2 or 3 times the expected recording time,
and make trial recordings before making the actual recording.
Do not expose the battery pack to water. The battery pack is not water resistant.
About the remaining battery power indicator
When the power goes off even though the remaining battery power indicator
indicates that the battery pack has enough power to operate, charge the battery
pack fully again. The battery level will be indicated correctly. Note, however, that
the battery indication will not be restored if it is used in high temperatures for a
long time, or if left in a fully charged state, or when the battery pack is frequently
used.
About storage of the battery pack
If the battery pack is not used for a long time, fully charge the battery pack and
use it up on your camcorder once a year to maintain proper function. To store
the battery pack, remove it from your camcorder and put it in a dry, cool place.
150