Filter
Top Products
102
Menus
4:3 Default
Select the default
Screen Mode to
use for 4:3 sources
Wide Zoom Select to enlarge the 4:3 size picture, while the
upper and lower parts of the picture are
condensed to fit the wide screen.
Normal Select to return the 4:3 picture to normal mode.
Full Select to enlarge the 4:3 picture horizontally
only, to fill the wide screen.
Zoom Select to enlarge the 4:3 picture horizontally
and vertically to an equal aspect ratio that fills
the wide screen.
Off Select to continue using the current Wide Mode
setting when the channel or input is changed.
Vertical Center Allows you to move the position of the picture up and down in
the window. (Available only in Wide Zoom and Zoom modes.)
Press V or v and press to choose a correction between +15
and –15 (Zoom mode), and +5 and –5 (Wide Zoom mode).
Vertical Size Allows you to adjust the vertical size of the picture. (Available
only in Wide Zoom and Zoom modes.)
Press V or v and press to choose a correction between +7
and –7.
Screen Saver Orbit Moves the picture position to reduce image
retention. This does not prevent image retention
completely if the same picture is displayed for
an extended period of time.
All White Displays a white screen to reduce image
retention.
Option Description
z
If 4:3 Default is set to
anything but Off, the Wide
Mode setting changes only
for the current channel.
When you change
channels (or inputs), Wide
Mode is automatically
replaced with the 4:3
Default setting. To retain
the current Wide Mode
setting as channels and
inputs are changed, set
4:3 Default to Off.