Filter
Top Products
51
Remote Control
qf Power
Buttons
SAT/CABLE*: Press to turn on and off the satellite receiver,
cable box, and other audio/video equipment you have
programmed into the remote control. For instructions, see
“Programming the Remote Control” on page 52.
POWER: Press to turn on and off the TV.
qg RESET Press to reset the settings to the factory defaults. See pages 96
and 99. Also used to clear Favorite Channels (see page 63).
If FUNCTION is switched on DVD/VCR
z REC Press to record a program.
qh TV/VIDEO Press repeatedly to cycle through the video equipment
connected to the TV’s video inputs.
qj DISPLAY Press once to display the current channel number, current time,
and channel label. If set, the current channel number will
display for 10 seconds.
qk JUMP Press to jump back and forth between two channels. The TV
alternates between the current channel and the last channel
that was selected.
ql 0 - 9
ENTER
Press 0 - 9 to select a channel; the channel changes after 3
seconds. Press ENTER to change channels immediately.
w; FAVORITES Press to display the Favorite Channels list. For details, see
page 63.
wa FREEZE Press to freeze the picture. Press again to restore the picture.
For details, see “Using the Freeze Function” on page 64.
ws i.LINK Press to display the i.LINK Control Panel. For information on
using the i.LINK Control Panel, see page 91.
wd
MEMORY
STICK
Press to display the Memory Stick Menu. For details, see
“Using the Memory Stick Viewer” on page 71.
wf MENU Press to display the Menu. Press again to exit from the Menu.
For details, see page 95.
wg CH +/– Press to scan through channels. To scan quickly through
channels, press and hold down either CH.
* If not Sony brand, requires that you first program the remote control (page
52).
Button Description