Filter
Top Products
130
Sound System
Select an available TV system (page 128).
Name
Changes or enters a new station name (up to
5 characters). The recorder must receive
programme position information (e.g.,
SMARTLINK information) for station
names to appear automatically.
Press ,, then press </, repeatedly to
select a character.
To change the characters, press M/m to
move the cursor, and press </,.
Decoder
Sets the external decoder (PAY-TV/Canal
Plus analogue decoder) channels.
For details, see page 37.
After the programme positions have been
set, you can change the order of each
programme position in the display list.
1 Press M/m to select the programme
position number you want to swap, and
press ,.
• To display other pages, press ./
> repeatedly.
2 Press M/m to select the programme
position number to swap for the one
selected in step 1, and press ENTER.
The programme position numbers are
swapped.
• To swap the programme position
number of another station, repeat from
step 1.
Video Settings (Video In/
Out)
You can adjust items related to the image,
such as size and colour, according to the type
of TV, tuner, or decoder connected to the
recorder.
Selects the colour system when picture noise
appears after you change the “Input Line
System” setting (page 125).
z Hint
When “Input Line System” is set to “NTSC,” you
can select “Auto,” “3.58NTSC,” or “PAL-60.”
b Note
“Input Colour System” cannot be set when
viewing digital broadcasts.
Selects the signal format in which the
recorder outputs video signals: interlace or
progressive, from the COMPONENT
VIDEO OUT jacks.
B/G Select this when in West
European countries, except
those listed in “Receivable
channels” on page 128.
D/K Select this when in East
European countries.
I Select this when in Great
Britain/Ireland.
L Select this when in France.
Channel Swapping
Input Colour System
Auto Recorder automatically
detects signals of colour
systems and selects the
appropriate colour system.
PAL Selects the PAL colour
system when “Input Line
System” is set to “PAL/
SECAM.”
SECAM Selects the SECAM colour
system when “Input Line
System” is set to “PAL/
SECAM.”
Component Video Out
Normal(Inter-
lace)
Outputs signals in the
interlace format.
Progressive Outputs signals in the
progressive format. Select
this when you want to view
progressive signals.