Filter
Top Products
32
z Hint
If you want to run “Easy Setup” again, select
“Easy Setup” in the “Basic” setup from “Initial
Setup” in the System Menu (page 125).
Follow the instructions below to set up the
GUIDE Plus+ system and use the connected
set top box receiver.
1 Press GUIDE.
The GUIDE Plus+ system “Basic
Setup” appears.
2 Select an item using M/m, and press
ENTER. Then set each item.
Language
Select a language for the on-screen
displays using M/m, and press ENTER.
Country
Select a country/area using M/m, and
press ENTER.
Postal Code
Enter your postal code using </M/m/
,, and press ENTER.
If “Country” is set to “Others,” you
cannot enter a postal code and the
GUIDE Plus+ system will not search for
a host channel.
• If you do not need to set up the GUIDE
Plus+ system, press SYSTEM MENU
to exit.
• Even if you cannot use the GUIDE
Plus+ system where you live, you can
still set up a manual recording. See
“Setting the timer manually
(Schedule)” on page 68.
External Receiver 1/External
Receiver 2/External Receiver 3 (only
when connecting the set top box
receiver)
1 Press ENTER to select “Continue.”
2 Select the set top box receiver type
using M/m, and press ENTER.
3 Select the provider using M/m, and
press ENTER.
4 Select the receiver brand using M/
m, and press ENTER.
If you select “Other providers,” you
can select a receiver brand from a
list of all available brands.
If your receiver brand is not on the
list, select “???.”
The receiver brand list is
automatically updated, so your
receiver may be available at a later
date. Select your brand when it
becomes available. Until then, use
“???.”
5 Select the connection you used for
your set top box receiver using M/
m, and press ENTER.
When the set top box receiver is
connected to the recorder using
hookup C with both an aerial cable
and a SCART cord, select either
“Line1” or “Antenna.”
The display asks for confirmation.
6 Press ENTER to select “Continue.”
The Video Window switches to the
specified programme position.
7 Select “YES” using M/m, and press
ENTER.
The display asks for confirmation.
If the Video Window does not
switch to the specified programme
position, select “NO” and press
ENTER until the Video Window
switches to the specified
programme position.
Setting up the GUIDE Plus+
®
system (For analogue
broadcasting/in areas with
GUIDE Plus+ only)