Filter
Top Products
36
1 Make a recording.
See “2. Recording a Program” on
page 27.
2 Press Z OPEN/CLOSE.
The display shows the approximate time
required for finalizing and asks for
confirmation.
For DVD+RWs, the recorder
automatically starts finalizing the disc.
After finalizing, the disc will be ejected
automatically.
3 Select “OK,” and press ENTER.
The recorder starts finalizing the disc.
After finalizing, the disc will be ejected
automatically.
1 Insert a disc.
See “1. Inserting a Disc” on page 27.
2 Press OPTIONS to select “Disc
Information,” and press ENTER.
The “Disc Information” display appears.
3 Select “Finalize,” and press ENTER.
The display shows the approximate time
required for finalizing and asks for
confirmation.
4 Select “OK,” and press ENTER.
The recorder starts finalizing the disc.
z Hint
You can check whether the disc has been finalized
or not. If you cannot select “Finalize” in step 3
above, the disc has already been finalized.
b Notes
• Depending on the condition of the disc,
recording, or the DVD equipment, discs may not
play even if the discs are finalized.
• The recorder may not be able to finalize the disc
if it was recorded on another recorder.
Finalizing is necessary when
playing on any equipment other
than this recorder.
After finalizing, you cannot edit or
record on the disc.
Finalizing the disc
using Z OPEN/CLOSE button
+
R
-
R
Video
OPTIONS
</M/m/,,
ENTER
Z OPEN/
CLOSE
Finalizing the disc using “Disc
Information” display