Filter
Top Products
40
The recorder can receive and record stereo/
SAP programs.
Recording stereo programs
If there is noise in the stereo program, set
“Auto Stereo” in the “Audio” setup to “Off”
(page 76). The sound will be recorded in
monaural but with less noise.
SAP (Second Audio Program)
When a SAP (Second Audio Program) is
received, the “SAP” indicator lights up on the
front panel display. To record only SAP
sound, set “Tuner Audio” in the “Audio”
setup to “SAP” (page 76).
Pictures with copy protection cannot be
recorded on this recorder.
When the recorder receives a copy guard
signal, the recorder continues to record but
only a blank, grey colored screen will be
recorded.
* The recorded disc can be played only on CPRM
compatible equipment (page 8).
Timer Recording
You can set the timer for a total of
40 programs, up to 30 days in advance.
Set the date, time, and channel of the program
manually.
b Note
Do not operate your cable box or satellite receiver
just before or during a timer recording. This may
prevent the accurate recording of a program.
1 Press TIMER.
2 Press M/m to select the “Day and
Time” or “Mode” row. Then press
ENTER.
Recording a stereo/SAP
program
Unrecordable pictures
Copy control
signals
Recordable discs
Copy-Free
Copy-Once
(CPRM*)
(CPRM*)
Copy-Never None (a blank screen is
recorded)
+
RW
-
RWVR
+
R
-
RW
Video
-
RVR
-
R
Video
-
RWVR
-
RVR
+
RW
-
RWVR
-
RW
Video
-
RVR
+
R
-
R
Video
</M/m/,,
ENTER
TIMER
x REC
STOP
OPTIONS
z REC