Filter
Top Products
72
2
Select “Antenna / Cable,” and press
ENTER.
3 Select an option, and press ENTER.
4 Select “Manual Channel Setup,” and
press ENTER.
5 Press M/m to select the channel you want
to activate, and press ENTER.
6 Press </, to select “Activate
Channel,” and press ENTER.
The disabled channel will be skipped
when you press CH +/–.
7 Press M/m to select “Yes” to activate the
channel.
8 Press , to select “AFT.”
9 Select “On” to turn on AFT, and press
ENTER.
• If the Auto Fine Tuning function does
not work effectively, select “Off” in
step 8 and press ,. Press M/m to
obtain a clearer picture, and press
ENTER.
10 To preset or disable another channel,
repeat from step 5.
Auto (Auto Clock Set)
Turns on the Auto Clock Set function when a
channel in your local area broadcasts a time
signal.
1 Select “Clock” in “Basic,” and press
ENTER.
2 Select “Auto,” and press ENTER.
Antenna Presets VHF and UHF
channels.
Cable
Presets cable TV
channels.
Yes
Activates the channels.
No Disables the channels.
On Turns on the Auto Fine
Tuning function.
Normally, select this.
Off Allows you to adjust the
picture manually.
Clock