Sony RDR-HXD770 DVD Recorder User Manual


 
146
3
Enter your four-digit password using the
number buttons, and press ENTER.
• To change the password, enter your
four-digit password in the “Current
Password” row using the number
buttons, and press ENTER. Then enter
a new password in the “New Password”
row using the number buttons.
The password setting/password changing
setting is completed.
b Note
If you forgot your password, reset the recorder
(page 158).
DVD Playback (DVD VIDEO only)
Playback of some DVD VIDEOs can be
limited according to a predetermined level,
such as the age of the users. Scenes may be
blocked or replaced with different scenes.
1 Select “DVD Playback” in “Parental
Lock,” and press ENTER.
To register a new password, see “Set
Password/Change Password” on
page 145.
2 Select “Standard,” and press ENTER.
3 Enter your four-digit password using the
number buttons, and press ENTER.
4 Select “Code” (geographic area) as the
playback limitation level, and press
ENTER.
The area is selected.
When you select “Number,” press the
number buttons to select and enter a
country/area code in the table
(page 168), and press ENTER.
5 Select “Change Level,” and press
ENTER.
6 Enter your four-digit password using the
number buttons, and press ENTER.
7 Select the level.
The lower the value, the stricter the
limitation.
Discs rated higher than the selected level
will be restricted.
8 Press ENTER.
The DVD Playback setting is completed.
To cancel the DVD Playback setting for
the disc, select “Off” in step 7.
D.TV Age Limit
Viewing of some digital TV programmes can
be limited according to the age limit you set.
To watch programmes that exceed the age
limit you set, your password is required.
(for customers in France/Denmark/Finland,
or Sweden only)
1 Select “D.TV Age Limit” in “Parental
Lock,” and press ENTER.
2 Select “Next Screen,” and press ENTER.
The “D.TV Age Limit” display appears.
3 Enter your four-digit password using the
number buttons, and press ENTER.
4 Select an age as limitation level, and
press ENTER.
The setting is completed.
To cancel the setting, select “Off.”