Filter
Top Products
69
GUIDE Plus+ (For analogue broadcasting only)
5 Wait for one day until the programme
guide data can be received.
If the programme guide data has not been
received after waiting for a day, search
for the host channel at the following
website and set the host channel
manually (“Changing the GUIDE Plus+
host channel manually” (page 69)).
www.europe.guideplus.com
If the set top box receiver is connected to the
recorder using a SCART cord only and you
want to receive the programme guide data
from your set top box receiver, search for the
host channel on the following website and set
it for your area, following the steps below:
www.europe.guideplus.com
1 Select “Setup” in the Menu Bar.
The GUIDE Plus+ setup menu appears.
2 Select “Host Channel Setup” using M/
m, and press ENTER.
3 Press the yellow button (“Change”)
twice.
“Manual” appears.
4 Select “Source” using ,.
5 Press the yellow button (“Source”)
repeatedly to select the input source.
6 Select “Prog. No.” using ,.
7 Enter the programme position number
using the number buttons.
8 Press the green button (“Save”).
The display asks for confirmation.
9 Select “Confirm” using </,, and
press ENTER.
The display returns to the GUIDE Plus+
setup menu.
10
Wait one day until the programme
guide data can be received.
To cancel the settings
Press the red button (“Back”).
To return to the “Home” position
Press the blue button (“Home”).
The cursor returns to the home position on the
“Grid.”
To check the GUIDE Plus+ system
information
1 Select “Setup” in the Menu Bar, and
press ENTER.
2 Select “GUIDE Plus+ system
Information” using M/m, and press
ENTER.
Check whether programme position numbers
are the same as the programme position
numbers set in the “Analog Tuner” setup.
If you want to make adjustments to the
channel settings or change the channel name,
see “Aerial Reception Settings (Analog
Tuner)” (page 133).
1 Select “Editor” in the Menu Bar.
2 Press ENTER.
3 Press , to move the cursor to the
right column.
Changing the GUIDE Plus+ host
channel manually
Checking programme positions
,continued