Filter
Top Products
55
Timer Recording (For Freeview users only)
Rec. Mode Adjust
If there is not enough available disc space for
the recording, the recorder automatically
adjusts the recording mode to enable the
entire programme to be recorded. Set “Rec.
Mode Adjust” to “On” in the “Recording”
setup (page 143).
If the timer settings overlap
The confirmation screen appears.
To store the setting, select “Yes.”
To cancel the overlapped setting, select “No.”
To confirm, change, or cancel a timer
recording
See “Checking/Changing/Cancelling Timer
Settings (Timer List)” on page 60.
z Hints
• You can also display the Timer display by
selecting “Timer Recording” from the System
Menu.
• You can play the title as it is being recorded by
selecting the programme title on the Title List
(page 88).
b Notes
• If a message indicating that the HDD is full
appears on the screen, change the recording
destination to “DVD,” or make available space
for the recording (page 92).
• Check that the clock is correctly set before setting
the timer recording. If not, the timer recording
cannot be made.
• To record a satellite programme, turn on the
satellite tuner and select the satellite programme
you want to record. Leave the satellite tuner
turned on until the recorder finishes recording.
• Even if the timer is set for the same daily or
weekly programme, the timer recording cannot be
made if it overlaps with a programme that has
priority. “Overlap” will appear next to the
overlapped setting in the Timer List. Check the
priority order of the settings (page 60).
• Even if the timer is set, timer recordings cannot be
made while recording a programme that has
priority.
• The beginning of some recordings may not be
made when using the VPS/PDC function.
• You cannot extend the recording duration time
when “VPS/PDC” is set to “On.”
• The “Rec. Mode Adjust” function only works
with a timer recording and the VPS/PDC function
set to off. It does not function with Quick Timer.
• The recording mode cannot be set to “AUTO”
when “VPS/PDC” is set to “On.”
The EPG function is a feature that simplifies
setting the timer. Just select the programme
you want to record in the EPG display. The
date, time, and channel of that programme are
set automatically.
1 Press GUIDE.
2 Select a programme using </M/m/
,.
To know more about the navigation
options in the EPG application, see
page 48.
Recording TV programmes
using the EPG
</M/m/,,
ENTER
x REC
STOP
PAGE –
GUIDE
PAGE +
Red button
,continued