Filter
Top Products
150
SMARTLINK
b
Note
Set “Power Save” to “Off” in the “Basic” setup
(page 130) to set “SMARTLINK” to “Pass
Through.”
DivX
Registration Code
Displays the registration code of DivX video
files for this recorder.
For more information, go to http://
www.divx.com/vod on the Internet.
Set Preview (HDD only)
Selects the thumbnail type shown in the Title
List.
Software Update
You can check the current software version
of the built-in digital tuner and keep it up to
date with the latest software.
Manual Update
Updates the software manually.
1 Select “Software Update” in “Options,”
and press ENTER.
2 Press “Next Screen” and press ENTER.
3 Select “Start,” and press ENTER.
4 Select “Yes,” and press ENTER.
The update starts.
To cancel, press SYSTEM MENU.
The new software will be available next time
the recorder is turned on.
Auto Update
Technical Info.
You can check the current hardware and
software versions of the digital tuner.
USB
Restart USB Device
Restarts the connected USB device if it does
not respond to the recorder. If the connected
USB device still does not work properly, try
following:
–Turn the connected USB device off and on
again.
–Disconnect and then connect the USB
cable.
Confirm Printer
Displays the manufacturer and model name
of the printer connected to the recorder. Note
that this function may not work depending on
the printer.
TV Pause
Selects the tuner for the TV Pause (page 87).
This Recorder
Only
Allows you to use the
SMARTLINK function
with the recorder when the
recorder is in standby mode.
Pass Through Allows you to use the
SMARTLINK function
with the connected
equipment when the
recorder is in standby mode.
Quick
Preview
Plays short excerpts from
throughout the selected
title.
Normal Plays the selected title from
the beginning.
On Updates the software
automatically. Normally,
select this position.
Off Does not update the
software automatically.
Options 2
TV’s Tuner Selects this when
connecting the recorder to
your TV using the SCART
jack.
Recorder’s
Tuner
Selects this when
connecting the recorder to
your TV not using the
SCART jack.