Filter
Top Products
23
Changing the programmed
commands
To clear programmed commands
1 While pressing COMMANDER
OFF, press one of the SYSTEM
CONTROL 1, 2, or 3 button.
The key operations programmed for
that button are displayed in order.
2 While pressing the RESET key,
press the same SYSTEM
CONTROL button (1, 2, or 3)
again.
The contents of its program are
cleared and all the component names
flash.
When you want to set a new program
to this SYSTEM CONTROL button,
follow the Steps 2 – 5 on Page 21.
COMMANDER
OFF
+
SYSTEM CONTROL
1
SYSTEM CONTROL
1
RESET
+
To set SYSTEM CONTROL 3 back
to the factory setting (Power-on
commands for Sony
components)
1 While pressing COMMANDER
OFF, press SYSTEM CONTROL 3.
The programmed key operations are
displayed in order.
2 While pressing the RESET key,
press SYSTEM CONTROL 3.
The contents of its program are
cleared and all the components names
flash.
3 While pressing the RESET key
again, press SYSTEM CONTROL
3 again.
The series of the Power-on commands
for Sony Components are set and the
programmed operations are displayed
in order.
COMMANDER
OFF
+
SYSTEM CONTROL
3
SYSTEM CONTROL
3
RESET
+
SYSTEM CONTROL
3
RESET
+
LEARN
SC1
TV VCR
123
DBS TUNER
CBL CD OPMD DECKAMP
DVD
RESET
AB