Filter
Top Products
36
Symptom
A system control
program does not
function correctly.
The power of the
Commander turns off by
itself.
Remedy
• Make sure that you have programmed the commands in the correct
order. (page 20)
• Try changing the orientation of the Commander. If that does not help,
try placing the components as close to each other as possible.
• Check the status of the components and make sure that you have set the
components properly to receive commands from the SYSTEM
CONTROL buttons.
• This Commander is preset at the factory to switch the power off
automatically after 10 minutes if left unused. (Auto Power-Off, page 32)
You can change the power-off time from 10 to 90 minutes, or set the
Commander not to power off automatically.
Troubleshooting (continued)
For the customers in the U.S.A
Customer Support Information
After you have read through this manual, if
you still can not get the Remote Commander to
work properly, call the Sony Customer Support
Helpline at 1-800-822-2217.