Filter
Top Products
15
EN
To display only the frequently
used keys
You can hide keys you do not use. This
makes operations even easier to
understand, when the components have
many keys.
After Step 2 on page 13, while pressing
the RESET key, press the key you want to
hide (flashing). The pressed key changes
to slower flashing and will no longer be
displayed during remote control
operations.
To display it again, perform the same
procedure again.
Note
You can not hide a key which has “learned”
any signal.
Continued
Changing or erasing the
function of a learned key or
button
To change the learned function, clear it
first and perform learning again.
To clear the learned function of a
single key or button
RESET
1 After Step 2 on page 13, while
pressing the RESET key, press the
key or button you want to erase.
The cleared key flashes together with
other learnable keys.
+
RESET
P + P– V+ V–
MU
VCR1
RESET
123
456
78
0
9
2
-
-/--
1
-
ANT SW
INPUT
u
REC
LEARNNG