Filter
Top Products
22
EN
To set SYSTEM CONTROL 3 back
to the factory setting (Power-on
commands for Sony
components)
1 While pressing COMMANDER
OFF, press SYSTEM CONTROL 3.
The programmed key operations are
displayed in order.
2 While pressing the RESET key,
press SYSTEM CONTROL 3.
The contents of its program are
cleared and all the components names
flash.
Executing a Series of Commands
— System Control Function
(continued)
3 While pressing the RESET key
again, press SYSTEM CONTROL
3 again.
The series of the Power-on commands
for Sony Components are set and the
programmed operations are displayed
in order.
COMMANDER
OFF
+
SYSTEM CONTROL
3
SYSTEM CONTROL
3
RESET
+
SYSTEM CONTROL
3
RESET
+