Filter
Top Products
31
EN
Protecting your
settings and “learned”
signals
— Preset Lock function
You can lock the Commander so that you
can not change, add, or clear any of your
component code settings (page 7),
“learned” signals (pages 12, 24, 28, etc.),
System Control settings, (page 18),
volume setting (page 17), or System
Power-off setting (page 25).
1 While pressing COMMANDER
OFF, press ¤.
All the component names flash and
“uv OFF” key appears.
2 Press the u OFF key.
All the component names stop
falshing and stay lit, and “u ON”
flashes.
3 Press COMMANDER OFF.
When the preset lock is on
If you try to set a component code
number (page 7) or perform learning
(page 12), you will hear beeps and “NG”
flashes on the display.
To unlock the preset lock
To unlock the preset lock, follow the
same procedure as the above and press
“u ON” in Step 2. “u OFF” appears on
the display.
COMMANDER
OFF
+
¤
u
OFF
SYSTEM CONTROL COMMANDER
OFF
e
TV VCR1 VCR2 VCR3 DVD SAT/CBL
AMP CD MD/DAT DECK B/A TUNER DSP
PROGRAM
Á
–
+
–
+
=
+
123
¤
TV VCR123 SATDECK
AB
CD FM/AM DSPMD CBLAMP
DVD
u
OFF
3
1
2
TV VCR123 SAT DECK
AB
CD FM/AM DSPMD CBLAMP
DVD
u
OFF
TV VCR123 SAT DECK
AB
CD FM/AM DSPMD CBLAMP
DVD
u
ON