Filter
Top Products
Installing and Connecting the LCD Projection TV
39
Installing and Connecting the LCD Projection TV
Connecting a Digital TV Receiver with component connectors
Disconnect all power sources before making any connections.
Be sure to read the Set-top box manual.
1 Using three separate component video cables, connect the Digital TV
Set-top box’s Y, P
B and PR jacks to the LCD projection TV.
2 Using an audio cable, connect the Digital TV Set-top box’s Audio OUT
jacks to the LCD projection TV’s AUDIO IN jacks.
✍ The Y, PB and PR jacks do not provide audio, so audio cables must
be connected to provide sound.
✍ Component video connection is necessary to view 480i, 480p, 720p,
and 1080i formats. You may also use the S VIDEO or Composite
Video connections, however, component video (Y, P
B, PR) will
provide the best picture quality for all format types.
z
VMC-10
(not supplied)
Digital TV Set-top box
RK-C310/C320/C330 (not supplied)
AUDIO-R
(red)
Rear of LCD projection TV
Y
P
B
PR
AUDIO-L
(white)
✍ You cannot record the signal from any equipment connected into the
Y, P
B and PR connectors.
✍ This LCD projection TV is not compatible with digital TV receivers
configured with RGB or VGA output connectors.