Filter
Top Products
Using the Features
46
Watching the TV
Many TV features can be accessed directly through the remote control. The
following will explain the function of some of the buttons found on your
remote control.
Buttons for LCD
Projection TV
Operations
1 FUNCTION TV
Press to have the remote control operate the TV. The indicator lights up
momentarily when pressed to show which equipment the remote control is
operating.
2 ANT— (AUX input)
Press to change between the VHF/UHF input and the AUX input.
3 POWER
Turn the LCD projection TV on and off. If a video input indication (e.g.,
VIDEO 1, VIDEO 2) appears on the screen, press
TV/VIDEO or CH +/ – until
a channel number appears.
4 0-9 and ENT
Use for direct channel selection. Press 0-9 to select a channel (for example,
to select channel 10, press
1 and 0). The channel will change after 2 seconds,
or you can press
ENT for immediate selection.
5 CH +/–
Press to scan through the channels (+ up or – down).
6 VOL +/–
Press to adjust the volume (+ up or – down).
7 JUMP
Press to alternate or jump back and forth between two channels. The LCD
projection TV will jump between the current channel and the last channel
selected.
8 MUTING
Press to mute the sound. “MUTING” will appear on the screen. To restore
the sound, press again or press
VOL +.
9 FREEZE
This is useful when you need to copy down information that appears on the
LCD projection TV’s screen (see “Using the Freeze Function” on page 53).
POWER
DISPLAY
ENT
TV
TV/VIDEO
MENU
JUMP
FAVORITES
FREEZE
CODE SET
RESET SLEEP MTS/SAP
/TV/SAT ANT
GUIDE
CHVOL
SAT/
CABLE
FUNCTION
VCR/DVD
MUTING
VCR/
DVD
MODE
SAT/
CABLE
PICTURE WIDE
TV
RM-Y913