Filter
Top Products
Introducing the FD Trinitron Wega
4
Button Descriptions The POWER button on the remote control (no. 13 in the illustration
below) activates both the remote control and the TV.
Outside Panel
Button Description
1 MUTING Press to mute the sound. Press again or press VOL + to
restore the sound.
2 SYSTEM OFF Powers off all Sony equipment at once. (This feature may
not work with older Sony equipment.)
3 SLEEP Press repeatedly until the TV displays the time in minutes
(15, 30, 45, 60, or 90) that you want the TV to remain on
before shutting off automatically. Cancel by pressing until
SLEEP OFF appears. While Sleep feature is set, press once to
view remaining time
4 DISPLAY Press once to display the current time and channel label (if
set) and channel number. Press again to turn Display off.
See page 47 for details on setting the time.
5 JUMP Press to jump back and forth between two channels. The
TV alternates between the current channel and the last
channel that was selected.
6 Turns the headphones on/off.
7 PICTURE MODE Press repeatedly to step through the available video picture
modes: Vivid, Standard, Movie, Sports. Also available in the
Video menu. For details, see “Selecting Video Options” on
page 38.
8 TV/SAT Switches between the TV and SAT (satellite) inputs when in
SAT FUNCTION mode.
Provides quick access for changing available audio settings.
For details, see “Using the Audio Menu” on page 40.
9 MENU Press to display the TV on-screen menu. Press again to exit
from the menus.
q; VOL +/- Adjusts the volume.
qa Joystick allows for movement of the on-screen cursor.
Pressing down on the center of the joystick selects the item.
qs CODE SET Used for programming the remote control to operate non-
Sony video equipment. For details, see “Programming the
Remote Control” on page 52.
qd POWER buttons
(GREEN)
Turn on and off the TV and other audio/video equipment
you have programmed into the remote control. For
instructions, see “Programming the Remote Control” on
page 52.
qf FUNCTION
buttons
Select the equipment (TV, VCR/DVD, SAT/CABLE) that
you want to operate. The indicator lights up momentarily
when pushed to show which device the remote control is
operating.
1
4
q;
qa
qd
qg
qh
qj
qk
ws
wd
2
3
5
7
8
qs
6
9
qf
ql
w;
wa
To scan rapidly through the
channels, press and hold down the
CH+ or CH- button.
z
RM-Y182