Filter
Top Products
Introducing the FD Trinitron Wega
5
Inside Panel
qg TV/VIDEO
Cycles through the video equipment connected to the TV’s
video inputs:
TV
,
VIDEO 1
,
VIDEO 2
,
VIDEO 3
,
VIDEO 4
.
qh ANT Changes between the VHF/UHF input to the AUX input.
qj 0 – 9 and ENTER Press 0 - 9 to select a channel, the channel changes after 2
seconds. Press ENTER to select immediately.
qk SWAP Switches the position of the main picture with the window
picture.
ql Turns on/off PIP. For details, see “Using Picture in Picture
(PIP)” on page 31.
w; GUIDE Displays the program guide of your satellite antenna.
wa CH +/- Scan through channels.
ws RESET Press when in a menu to reset the settings to the factory
defaults.
wd Use to switch control for connected video equipment. You
can program one video source for each switch position. For
details, see “Programming the Remote Control” on page 52.
1 TV/VCR Switch between TV and VCR mode. If you have a
non-Sony VCR, you will need to program the remote
control to recognize your VCR. For details, see
“Programming the Remote Control” on page 52.
2 m Rewind
REC Record (press the blank button – above, left – at the same
time)
M Fast-forward
N Play
x Stop
X Pause (Press again to resume normal playback)
3 DVD MENU Displays the DVD’s menu.
4 TITLE Displays the DVD’s Title menu.
5 AUDIO Alternates sound between the main picture and the
window picture.
6 POSITION Moves the location of the PIP window picture.
7 MTS/SAP Cycles through the Multi-channel TV Sound (MTS) options:
Stereo, Auto-SAP, Mono.
8 FREEZE Freezes the window picture. Press again to restore the
picture.
9 CH +/– Changes the channel in the PIP window picture.
q; TV/VIDEO The PIP window picture, cycles through the video equipment
connected to your TV’s video inputs: TV, VIDEO 1, VIDEO 2, VIDEO
3, VIDEO 4. This allows you to select different sources for the
PIP display.
Button Description
AV 1 2 3 DVD
2
4
3
5
6
7
9
q;
8
1