Filter
Top Products
Installing the TV
27
Setting Up the TV Automatically
After you finish connecting your TV, you need to run Auto Setup to
set up your channels. The Auto Setup screen appears when you turn
your TV on for the first time after installing it. If you do not want to
set up the channels at this time, you can do it later by using the Auto
Program feature in the Channel menu (see pages 42 and 43).
Using Auto Setup 1 Press POWER to turn on the TV.
2 Press the TV function button on the remote control.
3 Press CH+ on the front of your TV to run the Auto Setup or press
CH– to exit. If you use the channel buttons on your remote control,
be sure to use the main set of buttons.
To reset TV to factory settings
1 Turn the TV on.
2 Hold down the RESET button on the remote control.
3 Press and release the POWER button on the TV. (The TV will turn
itself off, then back on.)
4 Release the RESET button.
✍ The Auto Setup feature does not apply for installations that use a cable box for
all channel selection.