Filter
Top Products
Installing the TV
18
Connecting Two VCRs for Tape Editing
If you connect two VCR’s together, so you can record from one to the
other, you may want to monitor the recording process. You can
connect the recording VCR into your TV and then view what is being
recorded. The procedure below shows you how to do this.
1 Using an A/V cable, connect the playback VCR’s Audio and
Video OUT jacks to the recording VCR’s Audio and Video IN
jacks.
2 Using an A/V cable, connect the recording VCR’s Audio and
Video OUT jacks to the TV’s Audio and Video IN jacks.
To change the video input of the VCR.
❑
See your VCR’s user’s guide for instructions.
To view what is being recorded
❑
Use the remote control to set the TV to the video input that the
recording VCR is connected to. (VIDEO 1 in the illustration
above.)
VCR (recording)
VCR (playback)
TV
A/V cable
A/V cable
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
✍ If the VCRs you are connecting have S VIDEO jacks, you can use S VIDEO
cables to improve picture quality; replace the yellow video cable of the
combination A/V cable with the S VIDEO cable. You will still need audio cables
for sound.