Filter
Top Products
Installing the TV
12
1 Connect the Cable TV cable to the TV’s VHF/UHF jack.
2 Using a coaxial cable, connect the TV’s TO CONVERTER jack to
the cable box’s IN jack. The TV’s internal converter allows you to
switch between unscrambled signals coming straight into the TV
and scrambled signals coming in through the cable box,
eliminating the need for an external splitter.
3 Using a coaxial cable, connect the cable box’s OUT jack to the
TV’s AUX jack.
To switch between channels from cable box and channels from regular cable
❑
Press the ANT button on the TV remote control. (This is a toggle:
pressing the button once selects the cable box; pressing the button
again selects regular cable.)
To use the cable box
❑
Have your TV tuner set to channel 3 or 4 (as appropriate) and
then use the cable box to switch channels.
To use the TV remote control to switch channels on the cable box
❑
Program the remote control as necessary. (See “Programming the
Remote Control” on page 52.) Then use the remote control to
switch cable box channels.
To use the TV remote control to switch channels on the VCR
❑
Program the remote control as necessary. (By default, the remote
control is set for a Sony VCR; to change to another brand see
“Programming the Remote Control” on page 52.) Then use the
VCR buttons on the remote control to switch channels on the
VCR.
To prevent the accidental switching of TV channels
❑
When using the cable box, you need your TV to stay on a
required channel (usually channel 3 or 4). You can use the TV’s
Channel Fix feature to lock in a specific channel. The Channel Fix
feature is under the Channel menu. For details, see “Using the
Channel Menu” on page 42.
1
2
3
Rear of TV
OUT
75-ohm coaxial cable (not supplied)
IN
AUX
TO CONVERTER
VHF/UHF
CATV cable (unscrambled channels)
Cable box
75-ohm coaxial cable
(not supplied)
Rear of TV
Rear of TV
(Continued from the previous page)