Filter
Top Products
115
Once the HDD has been firmly mounted in the DVR, connect the power cable and the
data cable.
To install the second HDD in the Removable Bay, set the Jumper setting on the
removable HDD to Slave. Follow the procedure as listed in paragraph1.1.1 of Appendix
V.
5.1.3 Installing CD-RW drive
To install the CD-RW drive in the Removal Bay as backup purpose, set the Jumper
setting on the CD-RW drive to Slave.]
Mount the CD-RW drive in the Removable Bay then
connect to DVR system.
Once the CD-RW drive has been firmly mounted in the DVR, connect the power cable
(4pin) and the data cable(40pin).