26
Others
1 RS-485 ID Setup 224
2 RS- 485 Protocol
3 Software Information
4 HDD Information
5 Shutdown
6 Exit
Software Information
1 CPU Filename D6SE0100
2 FPGA Filename
FPGA0505
3 Date 2002/01/23
4 Video System NTSC
5 DSP BD HW SK1V3302
5 DSP BD SW SK1V3300
6 Exit
Shutdown
1 Shutdown: No
2 Shutdown: Yes
3 Exit
6.7 Others
This menu allows you to check the RS485 communication protocol
and software version.
6.7.1 RS-485 ID Set Up
This item can only be accessed by the installer, the RS-485 ID address of this DVR-16/IP can
be modified here.
6.7.2 RS-485 Baud Rate
You can choose the baud rate form 38400, 19200, 9600, 4800 and 2400.
6.7.3 Software Information
This menu presents the software information.
6.7.4 HDD Information
This item shows you the HDD information.
HDD Size
The item shows how large size the current HDD has for saving
video files.
Free Size
It shows how much available space the current HDD leaves.
Total Rec Time
It shows how much time the current HDD originally can provide for saving the video files.
Free Rec Time
It shows how much time the current HDD can save video files. If the DVR is set to record
in linear mode (the system will not overwrite files when the HDD is full), the available
recording time will be calculated and shown on the screen automatically; or, if the DVR is
set to circular mode, the OSD display on the screen will be “- - - - Hr”.
6.7.5 Shutdown
This item allows you to shutdown the DVR-16/IP.
There is the other way to shutdown the DVR-16/IP: press ESC and
Down Arrow buttons simultaneously.
HDD Information 7-4
1 HDD Size 40GB
2 Free Size 17GB
3 Total Rec Time 7Hr
4 Free Rec Time ----Hr
5 Begin 2003/04/22 16:39
6 End 2003/04/23 11:12
7 Exit