Filter
Top Products
33
4. Direction buttons
4.1 If the “Pan/ Tilt” (check box) is enabled (default), these buttons are used to pan/ tilt the
connected dome cameras. Choose a wanted camera through “P/ T/ Z ID” before you tried to
pan/ tilt it.
4.2 If the “Pan/ Tilt” (check box) is disabled, these buttons can be used to select OSD menu
items of speed dome camera.
5. Menu/ Enter
In normal status, press this button to enter the OSD menu of connected speed dome camera.
This button is used as “Enter” button while in speed dome OSD menu mode.
6. Step Degree
Users can set the step degree of dome camera. You can choose form 1~15 degree.
7. DVR-16/IP-related buttons
Please refer to page 6 for the descriptions of these button functions. The password is required
before entering the DVR-16/IP menu through Internet.
8. Device Protocol
Here allow you to set the device protocol. For a communication to be successful, each device
must recognize and follow the same standard.
9. Sever
Press this button to go to the sever-related menu (Figure 1). Users can modify the sever
settings in this menu.
<Figure 1>